Although everyone knows the use of high and low temperature test chambers, some of the information related to them is rarely recognized. Recently, the technical engineer of Beijing Yashilin Testing Equipment Co., Ltd. summarized the 8 common senses of the precautions for the use of high and low temperature test chambers. Everyone should know. 1. The high and low temperature test chambers should be placed in a place with good ventilation, low humidity and stable ground. There should be 60~70cm of use and maintenance space around. Second, fixed once every three months to clean the condenser, should regularly repair the condenser fan and decontamination and dedusting of the condenser to ensure its good ventilation and heat transfer performance. Third, the circulation fan, condenser fan cleaning and balance: similar to the cleaning evaporator, because the working environment of the high and low temperature test box is different, the circulating fan and the condenser fan will condense a lot of small particles such as dust, should be carried out regularly Cleaning. Fourth, the high and low temperature test chamber should minimize the number of door opening operations and reduce the leakage of cold air. 5. The power supply voltage fluctuates greatly. If the power is repeatedly turned off, the use of the high and low temperature test chamber should be suspended, and the power supply should be turned off to prevent the compressor from being burned out. Do not power on the compressor immediately after the high and low temperature test chamber is stopped. It should be stopped after 2-5 minutes. 6. After the completion of each test, remove the test sample and wipe the working chamber wall of the high and low temperature test chamber to keep the inner box clean. 7. When the machine is not used for a long time, it should be energized regularly for the high and low temperature test chambers every month. The power-on time is not less than 1 hour. 8. When carrying high and low temperature test chambers, please pay attention to the inclination of the fuselage should not exceed 30°. Keep the vertical state of the box when transporting. Do not invert and lie horizontally. Never grab the door handle or pull the condenser. So as not to cause damage. Flower stands are designed as a kind of shelves and intended as an elegant stand for flowers grown not only indoors, but also on porches and balconies. They come in numerous designs – high or low – in a variety of styles, richly decorated or with strict minimalist lines, and they contribute to the appearance of every room. Flowers and plants make a room more inviting, comfortable and add freshness to the decor. However, when indoor plants and flowers become too many, homeowners are faced at the question how to arrange them in such a way so that to enjoy their beauty, but not overload the space? The obvious answer is to get a flower stand which will allow you to display your flowers and save valuable living space. Wooden Flower Rack,Wooden Plant Rack,Flower Stand,Plant Stand,Wooden Flower Stand,Plant Pot Stand,Flower Shelf Jinan Tri-Tiger Technology Development Co., Ltd , https://www.tigerwoodproduct.com
Flower stands can be designed either as a separate vase for home plants or as a composition which accommodates a miniature garden. Flower stand ideas differ in shapes, sizes, height, width, color and material. You can choose from classic designs, as well as unusual and original models. It may be a single stand for a pot with flowers or a stand for several pots. The advantage of a flower stand compared to any other furniture pieces is that it can help you to arrange the flower pots at different levels, combining them so that the larger flowers do not overshadow the smaller ones.
Typically flower stands are used to organize the pots in a vertical installation and the largest plants are placed on top while smaller plants are arranged at the lower levels.modern-flower-stand-design-ideas-modern-home-accessories-plant-stands-ideasDespite the fact that flower stands are not considered as the most important furniture pieces they often are an accent in the interior or exterior designs. For example, wrought iron options will perfectly complement the interior of a bedroom or living room and, at the same time, will look good as an element of the garden or patio decor. Wooden designs also perfectly fit into the interior and can be used in almost any style – from rustic, Provence, Shabby chic to modern, contemporary and minimalist.
The eight high and low temperature test chambers you most want to know