[ Chinese wardrobe net ] Wardrobe is a convenient item for people to store and change clothes. It can be divided into steel lockers, wooden lockers, and plastic lockers. Let's take a look at the features of the locker and the purchase considerations for the locker. Steel locker features Material: The material of the locker is made of high-quality cold-rolled steel plate of 0.4-0.9mm. Accessories: Wardrobe with ABS plastic handle or aluminum handle and door lock. Cabinet: The cabinet is phosphating and anti-rust treatment, using electrostatic spray (no harm to the human body and the surrounding environment, no toxicity, no side effects, no odor when used). Laminate: The height of the locker laminate is adjustable (sometimes fixed) for easy storage. Color: Usually the product color is matt white or grayish white. Other colors can be ordered. Specifications: 1800/1850*900*400mm specifications. Wooden wardrobe features 1. Veneer sheet: flexible fireproof board with thickness of 0.8-2.5cm. 2. Substrate: It adopts high-density board, high-quality green and environmental protection, formaldehyde content ≤1.0mg/L, density ≥760kg/m3, static bending degree ≥51.2Mpa, water absorption expansion rate ≤8.1%. 3, adhesive: latex. 4, edge sealing materials: PVC rubber edge, imported hot melt adhesive. 5, features: 1) Different colors and textures can be selected according to the swatches (straight lines and mountain lines; conventional varieties (gray white, white oak, eucalyptus, magnolia, cherry wood, black). 2) Different thicknesses (thickness 8mm, 12mm, 16mm, 25mm, 18mm, etc.) are selected for different purposes. 3) It is waterproof, anti-scalding, anti-fouling, acid-proof, alkali-proof and fireproof. Plastic locker features Color: Special colors can be customized. Inner panel: additional layers can be added to put shoes, caps and other small items. Lock: You can set coin, coin, password, electronic, key lock or no lock. Base: 4 levels of adjustment and aesthetics. Load-bearing: The single compartment can withstand 50 kg of weight and pressure without deformation, and can withstand 50 kg of punches, feet and other external forces without breaking. Cleaning and maintenance of lockers Wardrobes, as the name implies, refer to the cabinets used to change clothes and store clothes. At first, people used wooden lockers or steel lockers in their lives, but with the use of different places and humid environment requirements, near In the past few years, a waterproof and anti-corrosion locker has been born. Because it is made of plastic, it is moisture-proof, anti-corrosive and wear-resistant, non-toxic and tasteless, bright in color but will not fade, never rust, and has a service life. Long features, more suitable for people's daily life. Generally speaking, lockers can be divided into the following three types: one is a steel locker, the other is a wooden locker, and there is a plastic locker that was not commonly used before. For the cleaning and maintenance of the locker, the following aspects should also be followed. 1. The locker should be placed in a place where the air is relatively dry and protected from light. The damp environment tends to cause the plastic powder on the surface of the steel locker to fall off and then cause the rust of the locker. The plastic powder is sensitive to ultraviolet light and easily fades. To the beauty, it also affects the beauty of the home environment. 2, the locker can be cleaned with a damp cloth, and then wipe the moisture with a dry cloth to avoid moisture residue and damage the locker. For the parts that are not easy to clean in the locker, you can also use the toothpaste before cleaning. 3, to maintain the steel locker, restore its original luster, you can add a little vinegar in the hot water, then use a soft cloth to vinegar water, gently wipe, pay attention not too much force or it will damage the locker Paint film. To maintain the locker, you can also use the milk to remove the smell of the locker. First, put a cup of boiled milk in the locker, then close the door and wait until the milk is cool before removing the milk, so that the original smell in the locker It can be removed. The locker design needs to pay attention to the following points: 1. Whether it is the design, production process or function of the locker, these must be designed on the basis of practical principles, without excessive exaggeration. 2, the wardrobe design should be designed according to the actual life, giving it the perception of life, in order to capture the hearts of consumers. 3. The design of the locker should be both practical and aesthetic, so that the user will feel more comfortable when using it. 4. Let the locker design touch the consumers. 5, standardized module design, tailored for each user. Wardrobe purchase 1. The wardrobe of the coat should be at least 250mm thick. It should not be too thick or too thin. If it is too thick, it will be awkward. If it is too thin, it will be easily bent and deformed. 2, check the wardrobe whether there are insect eyes, falling off and so on, if there is, it means that the wood dryness of the wardrobe is not enough. 3. Open the closet door and pinch the inner material by hand. If there is a depression, it means that the inner material may have been decayed. 4, smell a smell of pungent smell in the closet, whether it is harmful to the human body. 5, observe the wardrobe door, can not fall, the drawer gap can not be too large, to be horizontal and vertical. 6, buy a small wardrobe, you can put those chairs and stools on the ground to drag or touch, to hear whether it sounds crisp. 7, the veneer locker gap between the connection should be strict, the leather paste should be flat, to ensure that there is no foaming, bulging. 8, for the light inspection. The above is the characteristics of the locker that I have summarized for you, the entire contents of the wardrobe considerations, I hope this article can help everyone. Please also continue to pay attention to us. Backpack,Small School Bag,Back Pack,Small Backpack GUANGZHOU KOBE LEATHER CO.,LTD , https://www.kobebags.com
Wardrobe product features locker purchase considerations