[ Chinese wardrobe network ] Why choose to buy the whole wardrobe ? Environmentally friendly fashion? Save space? Or economical? Xiaobian tells you that the most important thing in the overall wardrobe is the sheet, which directly determines the quality of the wardrobe. If you don't know all kinds of plates, economic? Environmental protection? Sorry, you will be fooled! The panels on the market are really solid wood, mainly including wood board, particle board, fiberboard, solid wood particle board, solid wood finger joint board and multi-layer solid wood board. Today, the wardrobe online Xiaobian I will unveil the true face of these 6 types of plates. â–¼ Wood board wood board, commonly known as large core board, is a plywood with solid wood core, the core sheet has a high bending strength and a relatively low bending strength. Most of the market is now solid, glued, double-sided sanding, five-layer blockboard, which is one of the most commonly used plates in decoration. These plates have good screw strength, high strength, and are characterized by firmness, sound absorption and heat insulation. The water content is not high, between 10% and 13%, the processing is simple and the most widely used. Due to the large use of urethane glue in the production process of wood board, the formaldehyde emission is generally high and the environmental protection is not good. â–¼ Particleboard Particleboard is a piece of buds, small diameter wood, fast-growing wood, wood chips, etc., which are cut into certain specifications. After drying, mixing with rubber, hardener, water repellent, etc., press at a certain temperature and pressure. A kind of artificial board is called a particle board because its section is similar to a honeycomb. The surface of the particle board is flat, the texture is realistic, the weight is uniform, the pollution is resistant, the aging resistance is more beautiful, the paint and various veneers can be applied, and the sound absorption, sound insulation and heat insulation effect are good, and the moisture resistance is strong. The amount of glue used in production is small and the environmental protection is good. â–¼ Solid wood particle board The so-called solid wood particle board is actually a kind of board produced by the process of particle board. It is a kind of particle board, also called oriented structure particle board. It is a kind of small diameter material, thinned wood, wood core, board skin and branch wood. The raw material is processed into special size slats by special equipment, and the surface layer slab is vertically and horizontally staggered and oriented after drying, sizing and special equipment, and then a wood-based panel is formed by hot pressing. This type of sheet is dried by an advanced single-channel dryer. The expansion coefficient is small and the moisture resistance is very good. The flank is oriented layered, so its internal internal texture is uniform, compared with ordinary particle board and powder. The MDF has strong nail holding force, bending resistance and stability. Such boards are widely used as European and American furniture manufacturers as high-grade environmentally friendly substrates. â–¼Fiber board fiberboard, also known as MDF, is made from plant fiber as the main raw material, through hot grinding, sizing, paving, hot pressing and other processes. The fiberboard has a density, the low density board fiberboard below 450kg/m3, the medium density fiberboard of 450-880 kg/m3, and the hard fiberboard above 880 kg/m3. This plate retains the original fiber, is pressed by high temperature, has good surface flatness, fine material and good stability. It can be easily shaped and milled. Its strength and hardness are better than particleboard, but it is not resistant to blisters. The amount of expansion is about 2mm on one side, so the MDF is more suitable for a drier environment such as a wardrobe. In addition, the amount of glue used in the production of fiberboard is large, and the environmental protection is slightly poor. â–¼ Solid wood finger joint plate Finger joint plate, also known as integrated plate, laminated timber, finger joint material, the plate that has been processed by deep processing of solid wood small pieces, because the wooden board uses a jagged interface, similar to the cross-docking of two fingers, Therefore, it is called the finger joint board. Since the raw wood strips are cross-joined, such a combined structure has a certain bonding force, and since the surface plate is not required to be adhered up and down, the glue used is extremely small. Because the joints of solid wood plates are less, the amount of glue used is also less, relatively environmentally friendly, easy to process, cut, drilled, sawed and shaped, but the solid wood finger joints are easily deformed and cracked. The quality of good solid wood finger joints is guaranteed, but the cost is high. â–¼Multi-layer solid wood board Multi-layer solid wood board is made of multi-layer plywood with criss-crossing and criss-crossing. The surface is made of high-quality solid wood veneer or technical wood, which is made by several processes such as cold pressing, hot pressing, sanding and health. to make. Since the multi-layer solid wood board is not easily deformed, and the indoor temperature and humidity can be automatically adjusted, the surface layer solid wood skin material has natural natural wood texture and hand feeling, so the selectivity is stronger. Therefore, it is highly favored by consumers. The multi-layer solid wood board has good structural stability and is not easily deformed. Due to the vertical and horizontal gluing, high temperature and high pressure, the deformation defects of the solid wood board are solved from the internal stress. In the production process, the self-made high-quality environmental protection glue is used to make the formaldehyde emission limit of the product meet the national standard requirements and be environmentally friendly. Three strokes to judge whether the board is good or bad 1. Look at the material to see whether the panel of the wardrobe is made of high-density board or particle board. The method of judging is that the fine fibers in the high-density board are tightly combined, and the density is large and heavy. The high-density board can withstand large pressure and has a long service life; while the fine particle structure of the particle board is not tight enough, even small pores can be seen, it is lighter in the hand, the gravity is small, and the service life is short. 2, smell the environmental protection to see whether the sheet substrate is environmentally friendly, as long as the content of free formaldehyde in the sheet is 9mg/100g, that is, the European E1 environmental protection standard, it is not harmful to human health. The most direct way is to open the door and pull it open. If there is a strong irritating smell, even tears, indicating that the formaldehyde content exceeds the standard; the second is to look at the merchant's material testing certificate to see if it holds the relevant national wood-based panel quality. Inspection certificate of the testing center. 3, plate specifications should bear in mind that there are some small manufacturers on the market in order to reduce costs, usually hanging sheep to sell dog meat, deceiving consumers. The thickness of the standard cabinet body is 18mm, and the small manufacturers generally use the particle board as a high-density board to promote the board thickness of 16 mm, and the consumer said that the board is 18mm. The back panel of the wardrobe is typically 9 mm thick and the door panel is 9 mm thick. Xiaobian prefers solid wood finger joints and multi-layer solid wood panels. Due to the rigor of material selection and process, the price is relatively high. The whole wardrobe is generally installed in the bedroom, and we get along with each other day and night. The choice of plates should be cautious when purchasing. All are based on health and environmental protection. Today, Xiaobian said that these six plates, you can definitely remember!
Facial rejuvenation treatment is a nonsurgical procedure that can help you look as vibrant as you feel, and it doesn't require the time and risks associated with traditional cosmetic surgery. This nonsurgical treatment can provide multiple benefits to men and women who want to erase defects caused by aging, the sun, scarring, pollution, and skin conditions.
As we age, our bodies naturally lose fat. This is especially evident in the face. Fat loss is especially apparent in the hollowing of the eyes and cheeks. Soft tissue fillers help to reduce fine lines and wrinkles by adding volume and fullness back to the face.
Reborn PLLA fillers can stimulate skin to produce collagen to reduce fine lines and wrinkles, improve acne scars, diminish sun spots, relieve redness and rosacea, fill wrinkles, etc.Reborn PLLA fillers are not fillers. They are collagen stimulators.The main ingredient of Reborn is poly l-lactic acid.It can stimulate the growth of collagen.Then Reborn can fill wrinkles and increase volume.Reborn can be used on the face, eyes, temple, neck, hands, breasts, buttocks, thigh, feet, etc.
Reborn PLLA Dermal Filler has 4 contents:
Reborn PLLA Hydrogel Filler has 5ml per vial:
If you want to konw more information or you want to make some changes,please contact us.
Email:info@rimlessindustry.com
WhatsApp:+86 18004455830
Facial Rejuvenation Treatment,Machine For Face Lift,Face Lift For Jowls,Face Lift Facial Rimless Industry Co.,Ltd. , https://www.rimlessmedbeauty.com
Buy a whole wardrobe? Let's take a look at the true look of the wardrobe sheet!