The T800 Direct Platesetter is a powerful entry-level output device with exceptional image quality, reliability and consistency. Based on the highly successful Kodak Full Victory Platemaking Platform and Kodak's new TH5 thermal imaging technology, the T800 Direct Platemaking Machine helps you provide high quality plates. This article will introduce you to the circulator circ. Many users who use the T-series processor may encounter a failure when the button is turned on and any button on the touch screen is unresponsive. This failure will cause the processor to not enter the standby state normally. This fault is caused by the potential drift of the scanner's touch screen. If this happens, please follow the steps below to recalibrate the processor touch screen to troubleshoot. Turn on the main power of the processor. If the processor has been turned on, please turn off the main power of the processor and turn it on again. After the shutdown, please wait 20 seconds - 20 seconds before turning on the main power of the processor. After the screen correction is completed, the prompt message PressthegreenStartbutton will appear again on the screen. Now press the green start button next to the screen, the device starts normally, and the fault that the touch screen does not respond can be eliminated. Whether the parts of the platen machine are damaged due to transportation, if any, immediately make a corresponding record and take pictures of the damaged part, and contact the carrier or supplier in time. A 4 minute tap water pipe should be connected to the equipment room. The height of the machine room drain should not be 150mm higher than the floor space of the platen machine. In order to facilitate the cleaning of the roller shaft and other parts, a properly sized pool should be provided in the equipment room. Article source address: http://
Germany imported beads
Imported French lens
mould Die-casting Eight edge type Revolving arm
Optional emergency power supply≥3 hours
The main features:
1)Ideal cold light effects
Using the new LED cold light source, ensure energy saving and environmental protection and long service life up to 80,000hours and more.
The temperature increase of surgeon`s head below 1℃. LED do not engender infrared ray and ultraviolet radiation, without the temperature
rise and tissue damage caused by halogen shadowless light, also it can accelerate the wound healing after surgery, and without Radiation pollution.
With color temperature constant and soft, LED is very close to the sunshine.
1) Excellent shadowless effect
Lamp with the most scientific radian and Multi point light source design, ensure better uniform illuminance. When the lamps are partially occluded,
also can achieve perfect shadowless effect.Lamp panel radius of gyration ≥182cm, the lamp can be pulled to vertical floor, convenient to any angle illumination.
2) Excellent deep lighting
It is based on modularize method by Computer Aided Design, focused to irradiating with more beams of LED. It produces the deep lighting which beams
more than 1200cm,the illumination of center up to 180,000Lux or more, and offer the color temperature that can be adjusted from 3700K to 5000K which
is close to sunshine. Absolutely, it really reflects the color of human tissue and satisfied by all kinds of operating light needs.
3) Advanced control system
The use of liquid crystal display button control, to meet the needs of the medical staff of different patients with the brightness of the operation.
It offers illuminance memory function.
It does not effect using when a single circuit or one bulb is broken.
4) Universal suspension system
Rotating arm, a new type of alloy material is made of eight edge type.
Balanced system using imported arm module, more than 5 group universal joints, every cantilever must has more than 3 joints which can be rotated in 360°,
The structure is light, easy to manipulate, accurate positioning, can provide the maximum range of regulation.The equipped with fatigue correcting unit and
fix position hand handle device, easy to fix position after long time use.
5) Modern laminar lamp
The thickest part of lamp-chimney is not more than 10cm.
The lamp-chimney is made of ABS, The handle on the central of lamp can be detachable, can take high temperature (≤ 134°C) sterilization treatment,
easily adjust, flexible fixed.
Mobile Type Operating Light,LED Examination Light,Mobile Operation LED Light,Mobile Stand Operating Light Shandong qufu healthyou Medical Technology co.,Ltd , https://www.kangerjianmedical.com
Screen processor