[ Chinese wardrobe net ] Solid wood wardrobe refers to furniture made of natural wood. The surface of the furniture can generally see the real texture of the wood. It not only includes people's impression that all the materials used in furniture are solid wood, including the table top, cabinet door panels, side panels, etc. are made of pure solid wood, without using any other form of man-made. The following solid wood wardrobe is for everyone to share: Solid wood wardrobe custom production process introduction 1, the total production steps of the product; preparation - raw processing - molding - paint - final assembly. Preparation: Change from logs to plates. It includes stereotype treatment of retort sterilization of wood, and then dried to a water content of 8% to 12%, and then it can be used. Raw processing: the formation of the product wood embryo workpiece; including: cutting, cutting, planing, planing and other processing procedures. Molding: Machining into parts that conform to various design shapes. 2, solid wood wardrobe production process: Breaking material (straight material, bending material), flat planing, planing teeth, teeth Mechanical processing and installation of secondary drying paint packaging Machining: It includes machining processes such as boring, boring, punching, and grinding. 3, paint finishing: The paints currently used in furniture are divided into five categories: water-soluble paints, nitrocellulose lacquers (NC), photosensitive paint (UV) unsaturated polyester lacquers (PU), and saturated polyester lacquers (PE). (1) Water-soluble paint: It is currently recognized as the most environmentally-friendly paint because it uses “water†as a diluent. The volatiles are non-toxic and tasteless. They are widely used in Europe, but they are not effectively promoted in China for a while – the price is too expensive (currently The domestic price is 150~180 yuan/kg). But this is the development direction of the furniture industry. The processing method can be sprayed or brushed. (2) Nitrocellulose lacquer (NC): It is made from natural raw materials (raw lacquer) and the thinner is turpentine. The Chinese have already started using this paint very early. The advantage is that it is environmentally friendly, easy to process, and can fully maintain the three-dimensional sense of wood natural fibers. The disadvantage is that there is less oil and the process requires repeated construction. This kind of paint is mostly used in mahogany furniture and exported to countries such as the United States and Japan. The processing method can be sprayed or brushed. (3) Unsaturated polyurethane paint (PU): Currently the most widely used paint in domestic furniture. The dilution additive is Tianna water (banana water), which contains benzene (strongly volatile, toxic) and is usually completely evaporated in 24 hours. Therefore, it can be described that the paint is a coating that is “not environmentally friendly (because of the volatilization of benzene), and the finished product is environmentally friendly (the deposited oil does not contain benzene). The processing method can be sprayed, brushed or spray coated. Safety lock, slide up to unlock, slide down to lock, to avoid accidentally touching the switch and causing water leakage. Food-grade silicone nozzle, soft silicone, protects the gums. Silicone pull bracelet, you can carry the water cup out of the door, convenient for travel. The inner tank is made of 304 stainless steel, no peculiar smell, good heat preservation performance Adult Bouncing Cup,Vacuum Thermo Cups,Stainless Steel Water Cup,Thermos Mug Wuyi Xukai industry and Trade Co.,Ltd , https://www.wyxukai.com
Solid wood wardrobe custom production process