1. Characteristics of late-season fish movements and favorable weather conditions Late autumn fishing is different from other seasons. The weather is colder day by day, colder morning and evening, and shorter daylight hours. Fish out of the nest late, return to nest early. Feeding of fish is not as greedy as it is every day in the spring. At this time, it is full of meat and fat. Even if it is eaten by quail and quail, it is also eaten without swallowing. Non-food is not eaten. Therefore, it is required to have uniqueness in fishing spots, fishing tackles, fishing lures and fishing techniques, otherwise it is difficult to do so. 2. The fishing spot is selected for deep-sea fishing. It is particularly important to choose a fishing spot. The fishing spot should be selected in the deep pool, such as the deeper side of the pumping station. Independent river ponds or ponds, fishes have nowhere to go, it is easy to find a deep fishing spot. The fishing spot should be sunny, but there are water peanuts and other objects that can block the shadows on the water. 3. Fishing tackles and bait fishing tackles require medium hardness, long ridges, long lines, small diameters, small catches, light falls, and drifts for seven-star floats. The object of fishing for fishing is mainly the ground fish such as cockroach and cockroach, and the bait is mainly fragrant and sweet clam. The bait is red clam, and it is best to be the size of a match stick. 4. Fishing techniques Fishing time is best from 9am to 4pm, with sunny weather. After standing on the fishing spot and measuring the depth of the water, the man first hits a bait nest in the deep pool and then hits a nest in the shallow water (about one meter). If the depths are on the side, a nest should be laid diagonally in the shallow water on the left or right side of the fishing spot. If conditions permit, nests can be played one day in advance and the nests will be replaced the next day. The fishing method is used to draw and drag and pull the tease method. After the hook is sent to the front of the nest for a foot, it is necessary to collect a few knots from the front of the nest (because it is easy to shake the fish with water). Then, while slightly lifting it, slowly pull back three feet or so, either left or right. Two litters can be used to try fishing. It is the best way to know which nest is the most biting fish. Procrastinate must be slow and slow. Pull 2 ​​to 3 rinsing seeds every time you drag. Observe the drift to be careful, when the float is up and one or two are not sinking and shaking, the timely lifting will be changed, the top floater should also promptly raise the fisherman, and sometimes fish. The working principle of thermal transfer printing: each printing head has a row of heating elements; these elements use glaze (a thin layer of glass) as a protective layer and are driven and heated at the appropriate time; the heat generated by these elements melts the ink on the ribbon and transfers the ink to the substrate due to the pressure of air pressure. Only the words of the heat transfer typewriter are not typed independently and can be printed in line. The fastest typewriter in the world can be 600MM per second. Heat Transfer Equipment, Color LED Printer, Color Laser Printer, Heat Transfer Printer GUANGZHOU INCODE MARKING TECHNOLOGY CO., LTD. , https://www.gzincode.com
2011 Outdoor Knowledge Season Three: Talking about Late Fall Fishing Tips