Deep Drawing is made by stamping. Its parts are light in weight, good in rigidity and material in plastic deformation. The internal structure of the metal has been improved, and the strength of the Stamping Parts has been improved. The surface of the material is not damaged during stamping, which provides convenience for surface spray painting, electroplating, phosphating and surface treatment. Deep Drawing Deep Drawing,Screw Nut,Clinch Bolt,Expansion Bolt Ninghai Feisheng Hardware Co., Ltd. , http://www.nbfeisheng.com
Compared with the current laser photocopying, its advantages are shown in the following aspects.
(1) The materials and equipment costs for films, exposure, rinsing, and revisions are eliminated.
(2) Benefits
Since the above steps and materials are omitted, the cost of plate making is greatly reduced. Shenzhen Printing and Recruitment saves time and space. With inkjet CTP technology, the cost of pre-press platemaking will be reduced by 30% to 50%.
(3) Time
Reducing the punching time and shortening the printing cycle of coated paper, especially for newspapers.
(4) Quality
Since the film is omitted and the text and information is moved from the computer to the printing plate, the layout accuracy and image transfer quality are further improved.
(5) The number of employees
A medium-sized offset printing press can save the number of workers who make impositions (including hand-to-hand calculations), proofreading, and save searched films (reprints).
(6) Price
The input cost of the system is only 1/10 of that of traditional laser imagesetters, and the price of the plate is almost the same as the current PS version.
(7) Environmental protection
Fundamentally, the serious pollution problem caused by the discharge of silver-bearing wastewater during photocopying was eliminated and it was a green and environmentally friendly product.
(8) Equipment
It eliminates the need for equipment such as darkrooms and laser imagesetters to be put into printing plants, and saves space, facilities, and other inputs to save the film (reprint).
(9) Technical aspects
The technology is easy to learn and easy to master.
(10) Comparison of process flow in plate making
Inkjet CTP plate making process: group version → pattern making → plate making.
Traditional plate-making process: group edition → photosetter → film → development → fixing → imposition → revision → printing → plate making. 
Talking about the Technical Advantages of CTP System
Inkjet CTP plates and systems are members of the CTP family. As early as the 20th century, companies in foreign countries were conducting related R&D work. However, due to restrictions on software and hardware at the time, Changchun Printing did not obtain sufficient results. development of.