The freeze-drying method is to quickly freeze the liquid in the material into solid ice, and directly vaporize the water from the solid state under the premise of insolubilization of the ice, and continuously remove the vapor, so as to achieve the purpose of drying the material. Bilang FD-1A-50 freeze-drying machine desktop design, compact, occupying a small table. Beautiful appearance, ergonomic design, and easy operation. Original imported fully enclosed compressor, efficient and reliable, low noise. The cold trap has a large opening and has a sample pre-freezing function. The cold trap is all stainless steel, no coil in the cold trap, smooth and corrosion-resistant, etc.! What should be paid attention to when installing the freeze dryer? The machine cannot be placed in a place exposed to sunlight, it must be covered, so as not to cause the temperature of the machine to be too high to dissipate heat properly; The cold dryer should be installed in a place with air circulation, there should not be too many obstructions, and keep good ventilation at all times; If the dryer is placed in a place with a lot of dust, it is necessary to install an easy-to-clean filter at the air inlet and clean it frequently, so as to ensure the normal use of the dryer; There should be no other machines with very serious heat around the dryer, to prevent other machines from dissipating heat and affecting the dryer. If multiple dryers are placed in the same room, the dryers should be placed laterally to prevent the machines from being affected. Welcome to Shanghai Bilang for more information. Puyang Optimus Household Products Co., Ltd , https://www.magicspongecn.com
Several major issues that should be noted when installing the freeze dryer